COMPENSOR 8 lots of performance for little money!
COMPENSOR
technology for harmonizing slope preparation with winch machines.
the rope, rope winch & anchor system gentle damper between the winch machine and the anchor system.
innovation, which pays off after a short time!
innovation with high profitability!
the Compensor 8 is a rope load compensator against unwanted rope vibration forces up to 80 kN (8 tons).
the Compensor 8 is a damper which absorbs the dynamic rope load impacts from rigid anchors (e.g. rock or concrete anchors).
the Compensor 8 has a progressive damping characteristic up to 80 kN, the damping travel is 120 mm.
explanation example
When the winch rope breaks free from the terrain contour intersection in the snow, enormous back and forth (dynamic) mass forces are created in the winch rope axis with a static pre-tensioning force of approx. 4,5 tons. These oscillating mass forces in a composite form of stress, called longitudinal and transverse forces, are reduced by the Compensor 8 at the first reflected oscillation force and the amplitude formation by 50%. The sum of all discontinuous forces in the rope axis are realistically and effectively balanced by the Compensor 8 in a breathable and dampened movement. The Compensor 8 immediately creates a gentle and, above all, harmonizing movement on the pre-tensioned winch machine.
benefits:
Reduction in general maintenance costs on the winch machine
- on the winch cable
- on the running wheels / drive rollers
- in the chain shoes
- on the turnstile
- on the winch arm